HRC Factory Quickshifter from Translogic UK

Factory Quickshifter Systems

Please select one of the following quickshifter products.

Quickshifter System 4
(Superbike quickshifter with AST )

Factory Race team recommended
Unique AST & Intellishift^TM quickshifter - Adaptive Shift Technology
Multi-channel quickshifter system
Micro controlled - no adjustment necessary, compact design
Plug & Play connectors for all stick coil installations as standard
Weather proof construction
Tough aluminium ECU housing - Delrin mounting plate
GP pressure sensor as standard - no adjustment required
Linear sensor option - for direct gear lever fitment
Optional ultra-bright 7 LED shiftlight array - flush or bracket mount
Superbike Championship winning product

Quickshift System 2
(Superbike quickshifter)

Factory Race team recommended
Multi-channel quickshifter system
Unique Intellishift^TM quickshifter
Micro controlled - compact design
User defined interrupt times
Plug & Play connectors for all stick coil installations as standard
Weather proof construction
Tough aluminium ECU housing - Delrin mounting plate
GP pressure sensor as standard - no adjustment required
Linear sensor option - for direct gear lever fitment
Superbike Championship winning product

Quickshifter System 6
(Supermoto/MX & Kart quickshifter)

Unique Intellishift^TM quickshifter
Micro controlled - compact design
User defined interrupt times
Integral standard 9volt battery power supply - lasts up to 2 years
Weather proof construction
Tough Derin ECU housing - aluminium mounting bracket
Extra tough long linear sensor design - designed to last

Quickshift System HD-VR
(Harley Davidson V-Rod quickshifter with AST )

Unique AST & Intellishift^TM quickshifter - Adaptive Shift Technology
Micro controlled - no adjustment necessary, compact design
GP pressure sensor and tie-rod as standard - no adjustment required
Weather proof construction
Simple bolt on design - fits all forward control V-rod variants
Optional ultra-bright 7 LED shiftlight array - flush or bracket mount

Translogic Quickshifters race dash perfomance exhaust alternative

Get on the motorcycle.
Start the engine in neutral.
Squeeze the clutch lever with your left hand all the way to the grip.
Place your left foot on the gear shifter and kick straight down to first gear.
Give a little throttle with your right hand. Don't race the engine.
Slowly release the clutch with your left hand while maintaining engine speed with your right hand on the throttle.
Balance the bike and move off slowly.
After you are moving and balanced, put your left toe under the gear shifter.
Squeeze the clutch and release tension on the throttle a little.
Smartly kick upward with your toe on the bottom of the gear shifter. You are now in second gear.
Release the clutch smoothly and simultaneously apply more throttle.
As you gain more speed, repeat the above steps for third, fourth, and fifth gears.
Downshifting is done similarly except you sharply kick down on the gear shifter to go to the next lower gear.
As you come to a stop, squeeze the clutch and kick down on the gear shifter, one gear at a time, timing it so you are in first gear as you stop.

Practice use of the clutch and throttle together so as not to stall the engine.
If you should stall the engine, make sure you have the front wheel straight ahead. Otherwise, you will fall.
Practice getting the gear shifter into neutral while stopped. Neutral is between first and second gear.

The GDU offers visual confirmation of gear selection within the transmission. This Ultra-Bright seven segment LED, (Light Emitting Diode). is among the brightest available. This display coupled with the precision Clarex™. smoked black window diffuser produces the highest contrast available for improved day light viewing and exceptional night time clarity. The sensor is the pinnacle of positional monitoring technology and is manufactured to high tolerance specifications allowing repeatability in production to within a measured tolerance of plus or minus 1%.

This Ignition interrupt (quickshifter) is probably the smallest, lightest and most technologically advanced system available. The Ezeshift is manufactured to the highest standard using high tolerance components and latest SMT, (Surface MountTechnology.) The Ezeshift negates the use of the clutch and throttle rolling while making upshifts and is designed to compliment virtually all variants of ignition systems.The Ezeshift System has the added benefit of offering visual confirmation of gear selection within the transmission utilising the GDU. Both the Ezeshift and the Ezeshift System use the same high specification sensor as the GDU.

The Powershift is the first tiptronic gear shift product of its type. This unique linear design allows fitment in confined areas as well as combining incredible power. The Powershift stands apart from its competitors by utilising DC motor and planetary gearbox technology which is then transferred into linear motion. The Powershift ven facilitates manual gear selection when fitted. Gears can be selected both up and down by the touch of a button.

The Powershift is available with a built in Ignition interrupt (quickshifter). This built in feature negates the use of the clutch and throttle rolling while making upshifts and like the Ezeshift is designed to compliment virtually all variants of ignition systems. Like the Ezeshift System the Powershift System also has the added benefit of offering visual
confirmation of gear selection within the transmission system utilising the GDU and sensor.