Motorcycle accessory performance part gear shift quickshifter

Micro Dash Systems Race Dash

Please select one of the following Micro Dash products.

Micro Dash MD1
(Micro Dash suitable for car applications)

General RPM with numeric indication
Speed indication - user defined MPH or KMH
Gear selection indication
Neutral position
Battery voltage
High beam indication
Ultra-bright 7 LED shiftlight array - full or half brightness
Temperature - user defined centigrade or fahrenheit
Distance - total distance
Trip distance
Low fuel indication - user defined
2 input channels - ideal for indicators left & right
Backlighting for night use - user defined red or blue
Clarex Anti-glare window
Billet aluminium construction
Manual lap-timer (100 laps memory)
Manual lap timer button for steering wheel installation

Micro Dash, race dash system, replacement gauge for race bikes. Features temperature gauge, volt meter, lap timer, gear indicator, sweeping bar graph tacho and more....

Micro Dash MD2
(Micro Dash suitable for Superbike applications)

General RPM with numeric indication
Speed indication - user defined MPH or KMH
Gear selection indication
Neutral position
Battery voltage
High beam indication
Ultra-bright 7 LED shiftlight array - full or half brightness
Temperature - user defined centigrade or fahrenheit
Distance - total distance
Trip distance
Low fuel indication - user defined
2 input channels - ideal for indicators left & right
Backlighting for night use - user defined red or blue
Clarex Anti-glare window
Billet aluminium construction
Manual lap-timer (100 laps memory)
Handle bar bracket for manual lap-timer button
4 Ladder frame brackets for universal installation

Micro Dash, race dash system, replacement gauge for race bikes. Features temperature gauge, volt meter, lap timer, gear indicator, sweeping bar graph tacho and more....

Micro Dash 2 HD-VR
(Micro Dash suitable for Harley Davidson V-rod)

General RPM with numeric indication
Speed indication - user defined MPH or KMH
Gear selection indication
Neutral position
Battery voltage
High beam indication
Ultra-bright 7 LED shiftlight array - full or half brightness
Temperature - user defined centigrade or fahrenheit
Distance - total distance
Trip distance
Low fuel indication - user defined
2 input channels - ideal for indicators left & right
Backlighting for night use - user defined red or blue
Clarex Anti-glare window
Billet aluminium construction
Manual lap-timer (100 laps memory)
Handle bar bracket for manual lap-timer button
Mounting plate suitable for V-rod Night Rod special 2007/8

Micro Dash, race dash system, replacement gauge for race bikes. Features temperature gauge, volt meter, lap timer, gear indicator, sweeping bar graph tacho and more....

Translogic Quickshifters race dash perfomance exhaust alternative

Get on the motorcycle.
Start the engine in neutral.
Squeeze the clutch lever with your left hand all the way to the grip.
Place your left foot on the gear shifter and kick straight down to first gear.
Give a little throttle with your right hand. Don't race the engine.
Slowly release the clutch with your left hand while maintaining engine speed with your right hand on the throttle.
Balance the bike and move off slowly.
After you are moving and balanced, put your left toe under the gear shifter.
Squeeze the clutch and release tension on the throttle a little.
Smartly kick upward with your toe on the bottom of the gear shifter. You are now in second gear.
Release the clutch smoothly and simultaneously apply more throttle.
As you gain more speed, repeat the above steps for third, fourth, and fifth gears.
Downshifting is done similarly except you sharply kick down on the gear shifter to go to the next lower gear.
As you come to a stop, squeeze the clutch and kick down on the gear shifter, one gear at a time, timing it so you are in first gear as you stop.

Practice use of the clutch and throttle together so as not to stall the engine.
If you should stall the engine, make sure you have the front wheel straight ahead. Otherwise, you will fall.
Practice getting the gear shifter into neutral while stopped. Neutral is between first and second gear.

The GDU offers visual confirmation of gear selection within the transmission. This Ultra-Bright seven segment LED, (Light Emitting Diode). is among the brightest available. This display coupled with the precision Clarex™. smoked black window diffuser produces the highest contrast available for improved day light viewing and exceptional night time clarity. The sensor is the pinnacle of positional monitoring technology and is manufactured to high tolerance specifications allowing repeatability in production to within a measured tolerance of plus or minus 1%.

This Ignition interrupt (quickshifter) is probably the smallest, lightest and most technologically advanced system available. The Ezeshift is manufactured to the highest standard using high tolerance components and latest SMT, (Surface MountTechnology.) The Ezeshift negates the use of the clutch and throttle rolling while making upshifts and is designed to compliment virtually all variants of ignition systems.The Ezeshift System has the added benefit of offering visual confirmation of gear selection within the transmission utilising the GDU. Both the Ezeshift and the Ezeshift System use the same high specification sensor as the GDU.

The Powershift is the first tiptronic gear shift product of its type. This unique linear design allows fitment in confined areas as well as combining incredible power. The Powershift stands apart from its competitors by utilising DC motor and planetary gearbox technology which is then transferred into linear motion. The Powershift ven facilitates manual gear selection when fitted. Gears can be selected both up and down by the touch of a button.

The Powershift is available with a built in Ignition interrupt (quickshifter). This built in feature negates the use of the clutch and throttle rolling while making upshifts and like the Ezeshift is designed to compliment virtually all variants of ignition systems. Like the Ezeshift System the Powershift System also has the added benefit of offering visual
confirmation of gear selection within the transmission system utilising the GDU and sensor.